Step 1: Hold the syringes in a vertical position and open
the red obturator cap on both syringes.
Step 2: Fix the transparent connector onto the small syringe with a firm rotation to the right and connect the screw tip of the bigger syringe with the connector until both syringes are firmly connected.
Step 3: Slowly inject the liquid of the small syringe into the powder containing syringe by concurrently pulling back the plunger in order to avoid overpressure in the syringe.
Step 4: Disassemble the connector plus the small syringe from the bigger syringe and obturate the tip of the bigger syringe with the red obturator.
Step 5: Shake the syringe vigorously for 5 seconds until a homogenous paste has been formed.
Step 6: The paste is now ready to be injected into the defect site.